Motherland Marketing & Services

Floor hardener for fresh concrete, Trimix  VDF concrete & Zeorich Base screed.

In Compliance With ASTM & IS NORMS
Zeorich Base HD(floor hardener) is an eco-friendly, high strength, shrinkage less, non-metallic, mineral base concrete floor hardener in powder form used for industrial & commercial floors to create heavy-duty floor surface which is resistant to high abrasion, impact, hardness, and also improve the compressive strength of the final surface. Floors made with Zeorich Base HD are monolithic in nature once they are fully cured.

 

Zeorich Base HD Hi-Tech Features

• A ready-to-use surface floor hardener in powder form makes it easy to apply and completely replaces the use of any other material on fresh concrete to improve the desire surface strength.

• Best in class abrasion resistance certified by an external lab. Loss of thickness just < 1.5 mm after abrasion.
• Very economical in comparison with other methods to improve the surface hardness and abrasion.

• Low VOC and suitable for green building
• Maintenance and cleaning of the floor become easy in the long run.
• Very heavy duty and provide compressive strength of > 40 Mpa on the top surface of the concrete, Flexural strength of > 6.5 Mpa.
• Improves the load-bearing capacity significantly of the base concrete floor
• The only dry shake of powder in the thickness of 2 to 6 mm. (in two coats) makes the floor enough hard to be ready for heavy use.
• Low water absorption and porosity compared to the traditional concrete surface.
• Very heavy duty and provide compressive strength of > 40 Mpa on the top surface of the concrete.

Zeorich Base HD Suitable areas

• Public infrastructure floors such as railways platforms, airports, stadiums, etc.
• Parking lots in commercial, industrial & residential areas.
• Heavy industrial floors such as steel factories, power stations, etc.
• Industrial floors, factories made with using Wallnut Zeorich Base fresh screed.
• Internal & External fresh concrete floor.
• Internal & external fresh floor made with fresh cement screed, PCC, or any other fresh floor made with fresh Tremix flooring.
• Industrial Warehouses, yards, loading bays & workshops.
• Other areas of heavy use such as restaurants & museums etc.

Suitable Surfaces

• Fresh concrete floors.
• Fresh screed made with Zeorich Base or other.
• Fresh IPS, PCC floors.
• Fresh Tremix flooring.
• Other fresh cementitious floorings.

Surface Preparation

• The fresh concrete cement ratio must be controlled to have the best final results of Zeorich Base HD.
• Expansion joint in base concrete must come throughout on top surface in order to avoid any kind of expansion crack on the top surface.

How to Apply

• Before applying the first coat of Zeorich Base HD, fresh concrete, screed, or trimix concrete must be settled, levelled and the initial phase of setting (30-45 minutes) in normal temperature lapses. During winter the initial setting phase can be longer.
• Once the concrete surface is ready to have a foot impression, not more than 2-3 mm. deep, apply the 1st first coat of Zeorich Base HD. Ideally, during the 1st coat 50 to 60 per cent of the product can be applied uniformly and evenly all across the floor surfaces. Once 1st coat application is done, the floor must be troweled to ensure that the surface absorbs the powder properly. In case a power floater is used after 1st coat, it must be lightweight and limited to ensure absorption of powder into the surface uniformly and base concrete doesn’t get disturbed.